Beko CEG5331X Bedienungsanleitung Seite 24

5
Cleaning
5.5 Further Setting
5.5.1 Adjusting The Quantity Of Your Coffee/ Hot Water
The machine can memorize your desired volume of coffee and hot water.
Preparing quantity for Latte Macchiato /Cappuccino/Coffee
1. Place a cup under the spout
2. Switch on the machine, all buttons lights on.
3. Press Latte/Cappuccino / Coffee button, only your desired one illuminates.
4. If machine dispenses milk, press and hold the button to continue and release the button when milk froth
reaches your desired volume. Milk froth stops with two beep sounds and the volume is now stored.
5. If machine dispenses coffee, touch and hold the button to continue and release the button when coffee
reaches your desired volume. Coffee stops with two beep sounds and the volume is now stored.
Preparing quantity for Hot Water
1. Place a cup under the spout
2. Switch on the machine, all buttons lights on.
3. Press Hot Water button, the button illuminates only.
4. The machine dispenses hot water. Touch and hold the button for 5 seconds to enter programming mode;
release the button when it reaches your desired volume. Dispensing stops now and the volume is now stored
The Latte/Cappuccino/Coffee/Hot water button is programmed: every time it' s pressed, the machine will brew
the same amount set.
24 / EN
Fully Automatic Coffee Machine / User Manual