Ballistic Output Formats - Leica RANGEMASTER CRF 1600-B Anleitung

BalliSTic OuTpuT fOrmaTS (

The advanced ballistic compensation (
Rangemaster CRF 1600-B allows you to display one of the
following three ballistic values after the measured range
if required:
- the equivalent horizontal range (
- the corresponding holdover (
- the number of clicks required on the rapid reticle
adjustment (MOA/clicks)
To include both the displayed holdover and the displayed
value:
EHr
a. the measured range to the target
b. the angle of inclination of the weapon
c. the set ballistic curve
d. the measured temperature and atmospheric pressure
values
e. the set zeroing range
)
Tm
ABC
) on the Leica
AbC
)
EHr
)
HOLd
notes:
• Calculation of the specified values is based on the
currently set ballistic curve, i.e. the curve must be
selected first (see p. 34).
• For safety reasons, ballistic output values are only
specified up to a range of 800m/875yds. The actual
measured range is also specified.
important:
• Please note that particularly at long ranges, the
influence of all relevant ballistic influencing factors is
greatly increased and considerable variations can occur.
The ballistic values displayed should therefore only be
viewed as a guideline.
• Regardless of whether this information is used, you are
responsible for assessing the relevant hunting situation.
36