Displaying The Set Ballistics Curve And; Zeroing Distance; Ballistic Output Formats - Leica GEOVID 42 HD-B Anleitung

DISpLAYING THE SET BALLISTICS CURVE AND

THE ZEROING DISTANCE
To check your settings, e.g. if the hunting situation has
changed or you have not used the binoculars for some
time, you can quickly display the three values at any
time.
To do this, briefly press the secondary / menu button
(8) twice.
• The following information briefly appears in turn
below the reticule (instead of the range) for approx.
2s:
– The set ballistics curve
– The set zeroing distance
– The set ballistic output value
BALLISTIC OUTpUT FORMATS (ABC
Advanced Ballistic Compensation (AbC) on the Leica
Geovid HD-B allows you to display one of the following
three ballistic values after measuring the range:
– the equivalent horizontal range (EHr)
– the corresponding point of aim (HOLd)
– the number of clicks required for quick reticule
adjustment
Both the point of aim and
account of:
a. the measured distance to the target,
b. the angle of inclination of the weapon,
c. the set ballistics curve,
d. the measured temperature and atmospheric
pressure values
e. the set zeroing distance.
Notes:
• The calculation of the specified values is based on
the set ballistics curve, i.e. this must be selected
first (see p. 41).
• Ballistic output values are only specified up to a
range of 800m/875 yards on safety grounds. In
addition, only the range actually measured is
specified.
)
®
value displayed take
EHr
43