Tuning In Stations - Eton E4 Betriebs-Handbuch

E4 WORLD RECORDER MANUAL
SETTING THE SENSITIVITY SWITCH
On the left side of the E4 is the sensitivity switch. There are three posi-
tion, DX, NOR and LO. Always start with the DX position, as this gives
maximum sensitivity. If the station is extremely strong use the NOR or
LO position, the position with the least sensitivity. Basically, use the posi-
tion that makes the signal sound best.

TUNING IN STATIONS

With the E4 turned on, stations are tuned with the - + buttons in manual
or auto-tune mode and the Direct Frequency Entry System (buttons 1-0).
AM stations are in kiloherz, KHz; all other stations are in megahertz, MHz.
Manual Tuning
Quick, short, sequential presses of the - + buttons enables tuning up or
down frequency.
Auto-Tuning
Pressing the - + buttons for longer than one second results in auto-tun-
ing, where the next available station is automatically tuned.
Direct Frequency Entry
With the G4 turned on, use the ENTER button and 0-9 buttons when the
desired frequency of a radio station is known.
To enter an FM frequency, press ENTER, then punch in the frequency
number; for example if it's 103.7MHz, press 1 0 3 70. Note that you must
enter a '0' last.
9