Product Description - WOLFF SAMBA Original Bedienungsanleitung

EN

1.0 Product description

Important components of the machine
The numbering of the product features refers to the
illustration of the machine on the graphics page 2-3.

A
1 Unlocking button
2 Gear lever
3 Unlocking handle adjustment
4 Lever for tank valve
5 Handle
6 Socket
7 Holder above
8 Holder below
9 Transport wheels
10 Rubber washer
11 Plug for handle
Functional description
Please refer to the graphics on pages 2-3 while
you read the operating instructions.
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 7062-91556-0 | Fax: +49 7062-91556-41 | www.wolff-tools.de
16
Restriction of use
The Grinding machine SAMBA is exclusively for wet-
cleaning and polishing of resilient and textile floor cover-
ings, and for grinding pavement and levelling compounds
in dry environments. It should not be used for any other
purpose.
When the machine is used in another way, it shall be regar-
ded as unfit for the purpose. Uzin Utz AG shall not accept
any liability for damage resulting from nonintended use.
Declaration of Conformity
We declare under our sole responsibility that this product is
in conformity with the following standards of standardization
documents: DIN EN 1037, EN ISO 12100, DIN EN 62841-1,
DIN EN 55014-1, DIN EN 55014-2 according to the provisi-
ons of the: 2006/42/EC, 2014/30/EU, 2014/35/EU.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the gathering
of the technical documentation.
01.04.2017 i.v.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1
Technical data
Power supply.................................................... 230V 50 Hz
Power consumption....................................1600 W (230 V)
No-load speed...................................................... 154 t/min
Weight ...................................................................... 44 kg
Diameter of discs........................................... 375-400 mm
Includes:
1 Grinding machine Samba
1 Tool kit
1 Operation manual