Pulse Measurement; Body Fat Percentage - BH FITNESS G6446N Monitor Betriebsanleitung

PULSE MEASUREMENT

Your pulse rateismeasured by placing both
hands on pulse sensors (R) with which the
electronic unitis equipped. The pulse rate
readout will appear after a few seconds. The
heart symbol beside the pulse rate value will
flash in time with your heart rate, Figure 4.
IMPORTANT. THIS IS NOT A MEDICAL
APPLIANCE AND THEREFORE THE HEART
RATE SHOWN IS MERELY FOR GUIDELINE
PURPOSES.

BODY FAT PERCENTAGE %

By pressing the (MODE) key when the machine
is (REA- DY), the LED for MANUAL will start to
flash, use the (+ –) keys to select the (BODY
FAT). Next, press the ENTER key to confirm it,
the (AGE) display will start to flash, select the
value and press (ENTER), now the (HEIGHT)
display will start to flash, specify the value and
press the (ENTER), key to confirm, the (MALE-
1 or FEMALE - 0) display will start to flash,
select the value and press (ENTER), the
(WEIGHT) display will start to flash, select the
value and press (ENTER).
The monitor is pre programmed with certain
values and ranges that you can also use, see
the following table:
Once you have providedthe monitor with the
necessary data, place both hands on the
sensors, Figure 4. After approximately one
minute your Body Fat reference point will be
shown on the program lights, see Body Fat
table.
BH RESERVES THE RIGHT TO MODIFY THE
SPECIFICATIONS
WITHOUT PRIOR NOTICE.
9
OF ITS PRODUCTS