Cleaning The Housing And The Plug-In Mains Adapter - Silvercrest SE 32 A1 Bedienungsanleitung Und Sicherheitshinweise

Tip: Clean the epilator head
epilator working effectively.
j
Slide the On / Off switch
j
Press the head release button
head with your other hand.
3
j
Press the small unlocking lever
head to the side and take the epilator roller system
3
the epilator head frame
j
Using the supplied cleaning brush remove the hairs from between
metal tweezers and the plastic parts.
j
Turn the epilator rollers to remove any hairs trapped in the epilator pairs.
j
Insert the epilator roller system
the double guides
j
Listen for the epilator roller system
j
Make sure that the gearwheels
tor roller system
the other.
j
Replace the epilator head
click.
j
Replace the protective cap
Cleaning the housing and
Q 
the plug-in mains adapter
m C AUTION! Do not use scouring agents. They may scratch the
surface.
j
Use a soft, slightly moist cloth or sponge only to wipe the epilator
housing and the plug-in mains adapter.
carefully after each use to keep your
3
downwards into position "0".
6
on the side and pull off the epilator
5
11
(see Fig. B).
2
back into the frame: Make sure that
4
and the gearwheel
9
4
10
and on the epilator are positioned one above
4
on to the epilator. Listen for the audible
3
.
1
Cleaning, storage
on the underside of the epilator
are on opposite sides.
10
to engage with an audible click.
on the underside of the epila-
out of
4
GB/CY 15