Samsung SCC-C6455P Benutzerhandbuch Seite 36

setup
3. Select each item and set appropriately.
POSITION : Set the starting and ending
positions for the <AUTO PAN>.
Move to the setting screen and adjust
pan/tilt to the desired starting position,
and then press [ENTER].
Again, adjust pan/tilt to the desired
ending position and press [ENTER] to
fi nish <AUTO PAN> setup.
DIRECTION : Sets the direction of the camera's movement from the starting to
the end position. (Based on panning)
ENDLESS : Instead of shuttling between start and end positions, the camera
turns 360° endlessly while stops for the <DWELL TIME> at both positions.
SPEED : Sets the moving speed of the camera, from 1 to 64.
DWELL TIME : Sets the dwell time at the starting and ending positions, from
1 to 60 seconds.
36_ setup
<RIGHT>
START
END
AUTO PAN 1 AUTO PAN 1
POSITION
DIRECTION DIRECTION
ENDLESS ENDLESS
[10] [10]
SPEED SPEED
DWELL TIME DWELL TIME
<LEFT>
START
END
LEFT LEFT
OFF OFF
3SEC 3SEC