Troubleshooting For Error Codes - Samsung SR8940 Benutzerhandbuch

TROUBLESHOOTING FOR ERROR CODES

ERROR CODE
• Vacuum cleaning robot is
caught, stuck or trapped
while navigating.
• A foreign substance (string,
paper, toy etc.) is caught in
the power brush.
• A foreign substance (string,
paper, toy etc.) is caught in
the left driving wheel.
• A foreign substance (string,
paper, toy etc.) is caught in
the right driving wheel.
• Check the Bumper sensor.
• A foreign substance (dust,
stain etc.) is on the Obstacle
sensor window.
• A foreign substance (Dust,
stain etc.) is on the Cliff sensor
window.
• Dust bin not inserted.
• A foreign substance (String,
cloth etc.) is caught on the
edge-cleaning side rotating
brush.
❈
If you press the Start/Stop button or turn off the Power Switch, the error code is cleared.
CAUSE
•
•
•
•
•
•
•
•
•
SOLUTION
Turn off the Power Switch at the bottom and
move the vacuum cleaning robot to a different
location.
Turn off the Power Switch at the bottom and
remove the foreign substance from the power
brush.
Turn off the Power Switch at the bottom and
remove the foreign substance from the left
driving wheel.
Turn off the Power Switch at the bottom and
remove the foreign substance from the right
driving wheel.
Turn off the at the bottom, and then remove
the obstacle from the front of the vacuum
cleaning robot or move it to a different location.
Turn off the Power Switch at the bottom and
wipe the foreign substance from the front and
rear sensor windows using a soft cloth.
Turn off the Power Switch at the bottom and
wipe the foreign substance on the cilff sensor
window with a soft cloth.
Insert the dust bin until you hear a "Click"
sound.
Turn off the Power Switch at the bottom and
wipe the foreign substance from the edge-
cleaning side rotating brush.
troubleshooting _45