Insulation Resistance - P Measurement; Substitute Leakage - P Measurement - TESTBOY TV 465 PRO Bedienungsanleitung

®
Testboy TV 465
There are no special options to be set in the Substitute leakage result screen.
60.

Insulation resistance - P measurement

10.1.25
The test is offered if it is applicable according to the autotest setting. The Insulation
resistance - P starting screen is displayed first. Measurement and options in Insulation
resistance - P starting screen are described in chapter 5.2.4 Insulation resistance - P.
After the measurement is carried out the Insulation resistance - P result screen is
62.
displayed.
63.
Options in Insulation resistance - P result screen:
65.
NEXT
REPEAT
10.1.26

Substitute Leakage - P measurement

The test is offered if it is applicable according to the autotest setting. The Substitute
leakage - P starting screen is displayed first. Measurement and options in Substitute
leakage - P starting screen are described in chapter 5.2.6 Substitute leakage - P.
After the measurement is carried out the Substitute leakage - P result screen is
67.
displayed.
68.
Options in Substitute leakage - P result screen:
70.
NEXT
REPEAT
61.
Figure 0.78: Insulation resistance - P starting screen
64.
Figure 0.79: Insulation resistance - P result screen
Proceeds with the next measurement.
Repeats the test (use in case of multiple isolated/SELV/PELV
accessible points). Lowest result will be stored.
66.
Figure 0.80: Substitute leakage - P starting screen
69.
Figure 0.81: Substitute leakage - P result screen
Proceeds with the next measurement.
Repeats the test (use in case of multiple isolated/SELV/PELV
accessible points). Highest result will be stored.
112
Autotest sequences