Insulation Resistance Measurement; Substitute Leakage Measurement - TESTBOY TV 465 PRO Bedienungsanleitung

®
Testboy TV 465
49.
50. Options in Earth continuity result screen:
NEXT Proceeds to next step.
REPEAT Repeat the test (use in case of multiple earthed points). Highest result will
be stored.

Insulation resistance measurement

10.1.23
The test is offered if it is applicable according to the autotest setting. The Insulation
starting screen is displayed first. Measurement and options in Insulation starting screen
are described in chapter 5.2.3 Insulation resistance.
After the measurement is carried out the Insulation result screen is displayed.
52.
53.
There are no special options to be set in the Insulation resistance result screen.
55.

Substitute leakage measurement

10.1.24
The test is offered if it is applicable according to the autotest setting. The Substitute
leakage current starting screen is displayed first. Measurement and options in Substitute
leakage starting screen are described in chapter 5.2.5 Substitute leakage.
After the measurement is carried out the Substitute leakage result screen is
57.
displayed.
58.
48.
Figure 0.73: Earth continuity result screen
51.
Figure 0.74: Insulation resistance starting screen
54.
Figure 0.75: Insulation result screen
56.
Figure 0.76: Substitute leakage starting screen
59.
Figure 0.77: Substitute leakage result screen
111
Autotest sequences