Herunterladen Inhalt Inhalt Diese Seite drucken

Roadstar HIF-8888TUMPN Bedienungsanleitung Seite 12

Vorschau ausblenden Andere Handbücher für HIF-8888TUMPN:
Inhaltsverzeichnis

Werbung

7
English
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
The system is able to decode and playback all MP3 /WMA file which stored in the me-
mory media with USB connecting port or SD/MMC memory card.
1.
Set function selector (15) at CD/USB mode and then press SOURCE button (6)
to select " USB or CARD" mode.
2.
Plug-in the USB plug with the face up & make sure it going into completely or in-
sert the memory card in the direction of the arrow as shown in the label on the under-
side of the MEMORY CARD slot cover. Insert straight without bending.
l
ckwards could damage the audio system or the storage media (USB thumb drive /
SD/MMC card). Check to be sure the direction is correct before connection.
3.
The system will start reading the storage media automatically after connecting,
and LCD display (18) will show the total number of MP3/WMA files and total number
of folder being detected.
4.
Repeat the same playback procedure as playing CD/MP3 disc as above .
REMARK
-
der mp3 and wma format only though the usb port.
-
USB socket , due to vari ances i n MP3 encoding format, some MP3 player may not
be able to play via the USB socket. this is not a mal-function of the system.
ENCODING OF CD/PHONO INTO MP3 FILE
The system is able to ENCODE normal CD or TURNTABLE to MP3 format and recor-
ding at memory media with USB connecting port.
A) CD ENCODING
I) Ecnoding 1 track
1.
perform normal playback of the cd track you want to encode & record,
2.
press " RECORD " button (9) during the playback of the desire track, unit will
display
" " & " " and flashing. Encoding is performing now.
3.
After completing of encoding, unit will stop playback automatically.
II) Encoding 1 disc
1.
Place a cd with the printed side facing up inside the tray & then close the co door
2.
press the " RECORD " button (9) after focus search completed. unit will display ""
& " " and flashing. Encoding is performing now.
3.
After completing of encoding, unit will stop playback automatically.
REMARK:
-
The recording speed is 1:1 and according to the actual plying time of the cd track
Connecting the USB upside down or ba-
The system can detect and read the file un-
If connect the system to MP3 player via the

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis