Programming With „Programming Mode - Caso CMP 1800 Bedienungsanleitung

15.8 Programming with „programming mode"
caso CMP1800
You can program up to 20 programs by yourself and save them
individualy.
Please note
To make sure, not to change in the programing mode during
operation, always open the door for programming.

Selecting Program
Press and hold the Powerlevel button - the display will show
"Program".

Setting the program number
Press the number keys to be programmed (Time set pad 1 - 0) -
the display shows the selected numbers

Setting power level
Press the Power button, according to the adjusted performance
level - the power level will be displayed in%.

Select cooking time
Set the desired cooking time using the numeric keys (Time set
pad 1 - 0) one - the display shows them.

Save
Press the program after the election the Start button to save
your settings. The display shows "Stage 2" and a long beep is
heard.
You can add an additional cooking time with the appropriate
power level:

Setting power level
Press the Power button, according to the adjusted performance
level - the power level will be displayed in%.

Select cooking time
Set the desired cooking time using the numeric keys (Time set
pad 1 - 0) one - the display shows them.

Save
Press the program after the election the Start button to save
your settings. The display shows "Stage 3" and "End" and a
long beep is heard.
To delete the keys, press the Stop / Clear.
70