Weekly Program: Examples - Würth 0886 500 212 Originalbetriebsanleitung

• C onfirm with OK.
• T hen, select the required temperature for the selected time
segment (example shows 17.0°C).
• C onfirm with OK.
• K eep repeating this process until you have finished storing
temperatures for the period from 0:00 to 23:59.
In Auto mode, the set weekly program is adopted by the
taught-in radio energy-saving controllers automatically
and the temperature can be modified at any time via the setting
wheel. The modified temperature will then be retained until the
next program changeover.

9. WEEKLy pROgRAM: ExAMpLES

The wall thermostat allows you to store up to 3 heating periods
(7 switching times) with individual temperature settings for each
day of the week. The factory setting consists of two heating
phases (from 6:00 until 9:00 and from 17:00 until 23:00
respectively) for every single day of the week:
From 00:00
From 06:00
From 09:00
From 17:00
From 23:00
To represent the switching periods, the display shows
bars for every other switching interval. In this example, no
bars are shown for the interval.
If a room also needs to be heated at around noon, the corres-
ponding program might look like this:
to 06:00
to 09:00
to 17:00
to 23:00
to 23:59
17.0°C
21.0°C
17.0°C
21.0°C
17.0°C
27