The noise test is carried out in accordance with EN ISO 15744:2008 - Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2).

The vibration test is carried out in accordance with EN 28662-1. Hand-held portable power tools – Measurement of vibration at the handle. Part 1: General and EN

8662-8, 1997. Hand-held portable power tools – Measurement of vibration at the handle. Part 8: Polishers and rotary, orbital and random orbital sanders.

Specifications subject to change without prior notice.

*The values stated in the table are from laboratory testing in conformity with stated codes and standards and are not sufficient for risk

evaluation. Values measured in a particular work place may be higher than the declared values. The actual exposure values and amount of

risk or harm experienced to an individual is unique to each situation and depends upon the surrounding environment, the way in which the

individual works, the particular material being worked, work station design as well as upon the exposure time and the physical condition of

the user. KWH Mirka, Ltd. cannot be held responsible for the consequences of using declared values instead of actual exposure values for

any individual risk assessment.

Further occupational health and safety information can be obtained from the following websites:

https://osha.europa.eu/en (Europe)

http://www.osha.gov (USA)

Model

Product Net