Storage; Disposal/Environmental Protection - Parkside PNTS 1400 E2 Originalbetriebsanleitung

To remove all residual liquids, fold
down the bow handle (1) and
take off the motor head (
the bow handle with the locking
levers (14), hold the stainless steel
container (9) with one hand on the
bow handle and the other on the
bottom of the container and pour
out the residual liquid.
• Clean the waste tank with a damp
cloth.
• Wash the foam filter (
warm water and soap, and allow to
dry.
• Beat the dust out of the fluted filter
( 23) and clean it with a paint brush
or hand brush.
• Replace the paper filter bag (
when full (see "Spare parts/Accesso-
ries" for reordering)
• Knock the optional dry filter (fabric
bag) out. Where necessary, wash with
lukewarm water and soap, and allow to
dry.
Maintenance
• The equipment is maintenance free.

Storage

1. Wind the mains lead (5) around
the handle (4).
2. Wind the suction hose (19)
around the handle (4).
3. The accessory holders (7/13)
are used to store the telescopic
suction pipe (17) and the nozz-
les (25/26).
4. Store the appliance in a dry
place and out of reach of chil-
dren.
Disposal/Environmental
protection
3): fix
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
21) with luke- Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on
for recycling. Contact our Service Centre
for more details. Defective units returned to
us will be disposed of for free.
24)
Machines must not be disposed of
with household refuse.
GB
11