Items Which Can Be Selected On The Remote Operation Panel Setting Display - Panasonic AW-CB400L Bedienungsanleitung

Menu settings

$ Items which can be selected on the remote operation panel setting display

Item
OPTION A
OPTION B
OPTION C
OPTION D
BUZZER
OPTION A - D settings (NOT USE, TELE, WIDE, NEAR, FAR, AF, IR THROUGH, 1/16ND, 1/64ND)
The following functions can be allocated to the OPTION SW [A] to [D] buttons.
NOT USE: The button's function is cancelled.
TELE, WIDE, NEAR, FAR:
When a convertible camera or AW-E655 camera, into which has been inserted an optional card with the lens
I/F card function, has been directly connected to the ROP, it is possible to control the zooming and focusing
of the motorized lens.
With the TELE setting, the lens is zoomed toward the "TELE" end for as long as the option button is held
down.
With the WIDE setting, the lens is zoomed toward the "WIDE" end for as long as the option button is held
down.
With the NEAR setting, the lens is focused toward the "NEAR" end for as long as the option button is held
down.
With the FAR setting, the lens is focused toward the "FAR" end for as long as the option button is held down.
AF: When a lens provided with the auto focus function is used, the ON and OFF settings of the auto focus
function are controlled.
Each time the button is pressed, the setting is switched from ON to OFF or vice versa.
When the auto focus function is set to ON, the lamp of the button to which this function has been allocated
lights; when it is set to OFF, the lamp is off.
IR THROUGH: The motorized filter of the AW-E655 is set to IR THROUGH. When the button is pressed again, it is set to
NORMAL.
The lamp of the button lights when the filter is set to IR THROUGH; it is off when another filter is selected.
1/16 ND: The motorized filter of the AW-E655 is set to 1/16ND. When the button is pressed again, it is set to
NORMAL.
The lamp of the button lights when the filter is set to 1/16ND; it is off when another filter is selected.
1/64 ND: The motorized filter of the AW-E655 is set to 1/64ND. When the button is pressed again, it is set to
NORMAL.
The lamp of the button lights when the filter is set to 1/64ND; it is off when another filter is selected.
BUZZER setting (OFF/ON)
This is used to set for the buzzer inside the remote operation panel to ON or OFF. The buzzer does not sound at the OFF
setting.
The buzzer sounds when the CALL button is pressed.
Setting
NOT USE, TELE, WIDE, FAR, NEAR, AF
IR THROUGH, 1/16ND, 1/64ND
OFF, ON
17 (E)
Initial value
NOT USE
ON