Inhaltsverzeichnis
Werbung
Cleaning
Wipe the outside using a gentle cleaning fluid. Do not use a scourer.
Maintenance and after sales service
To prevent damage, repairs must only be carried out by a customer service representative
approved by us.
The first maintenance service by our after sales service should be performed approximately two
years after the date the appliance was first used. The anticorrosion anode should be inspected
and, if necessary, descaled and cleaned. The after sales service will recommend a date for the next
maintenance service.
When you contact the after sales service, please quote your E no. and FD no. located on the
nameplate.
Technical data
Nominal voltage
Nominal power
Nominal current
Degree of protection / protection category
Nominal pressure
Weight [filled]
Fuse
Cold and warm water connection
Corrosion protection
Energy consumption during standby at 65 ºC
Volume of combined water discharge at 40 ºC
Time taken to heat up (12 ºC > 60 ºC)
14
50
[V]
[W]
[A]
[MPa]
[kg]
71
[A]
[kWh / 24h]
1.23
[litres]
95
[mins]
84
Capacity [litres]
80
100
230V / 50 60Hz
2000
8.7
IP 24 / I
0.6
107
131
10
G ½" A
Magnesium anode
1.57
1.78
146
193
134
168
Werbung
Inhaltsverzeichnis
