Application As Amok Alarm Signalling Device; Properties; Performance Features; Recommendation For The Usage - Honeywell proX BUS-2 Montage- Und Bedienungsanleitung

Mounting and Operating Instructions proX Keyswitch BUS-2
3.

Application as Amok alarm signalling device

3.1

Properties

The proX Keyswitch BUS-2 is especially suited for use as an amok alarm signalling device (e.g. in schools,
universities and other public buildings).
A device that is meant for triggering amok alarms must have special properties:
1. It must be so easy and safe to operate the device that it is practically impossible to trigger an alarm due to
operating error.
2. All data required for speedy intervention must be transmitted immediately to emergency services (e.g. the
police).
3. Triggering of false alarms willfully or accidentally must be prevented as far as possible.
The proX Keyswitch BUS-2 meets the requirements of the police.
3.2

Performance features

! Indication of operating state via green LED
! Unique identification when an alarm is triggered:
- WHERE:
- WHEN:
- WHO:
! Installation possibility of a half cylinder as per DIN 18252
! Integrated reader for IK2/proX1 and IK3/proX2 ID data carriers
! Operation via half cylinder or ID data carriers
! Operation at BUS-2 of the 561-MB24 /48 /100 /MB-Secure intruder alarm control panel series
! Programming as integrated BUS-2 user via control panel programming
! Simple administration of data carriers and authorizations via control panel programming or
IQ MultiAccess / IQ SystemControl
! Cover and tear-off monitoring
3.3

Recommendation for the usage

Basically, the proX Keyswitch can be used with data carriers or keys.
We strongly recommend the use of data carriers.
Only in this case the parameter "WHO?" can be transmitted.
e.g. address, building, floor, room number
exact time at which the alarm was triggered
person who triggered the alarm (possible only when a data carrier is used)
35