Parkside PMML 5 A1 Bedienungs- Und Sicherheitshinweise Seite 26

surface to be measured, the product will
continuously measure the distances.
Measured values will be shown on the
display
2
Note:
- Under continuous measurement mode,
the movement should be slow. Fast move-
ment of this product may get you
wrongly measured values (or) unreliable
values. Under such circumstances, you
could wait for more than 1 second with-
out any movement. You will get correct
value on the display
move slowly further for next measurement.
- Under continuous measurement mode,
the laser beam will be keep flashing as
long as the READ button
- Press MODE button
ured values.
26 GB
.
. Then, you can
2
is pressed.
6
to clear meas-
4