Customizing Your Monitor; Navigating The Menu; Picture Adjust Menu - Sony SDM-P246W Handbuch

Customizing Your Monitor

Before making adjustments
Connect the monitor and the computer, and turn them on.
For the best results, wait for at least 30 minutes before making
adjustments.
You can make numerous adjustments to your monitor using the
on-screen menu.

Navigating the menu

1 Display the main menu.
Press the MENU button to display the main menu on your
screen.
2 Select the menu and item.
Press the m/M buttons to select the item you want to adjust,
then press the OK button.
3 Adjust the item.
Press the m/M buttons to make adjustment, then press the OK
button.
When you press the OK button, the setting is stored, then the
display returns to the previous screen.
4 Close the menu.
When you press the MENU button, the menu closes.
If the MENU button is not pressed for 45 seconds after
adjustment, the menu disappears.
,
,
x Resetting the adjustments to the default
settings
You can reset the adjustments using ALL RESET menu. For more
information about resetting the adjustments, see ALL RESET on
page 19.
x Controlling the monitor by computer
Press the MENU button down for at least 5 seconds. You will see
an on-screen message indicating the current setting. After 3
seconds the DDC/CI setting is switched on or off, as shown
below.
On-screen messages
(Appear for a while)
DDC-CI : ON
(default setting)
DDC-CI : OFF
Note
This function applies only to computers that support the DDC/CI (Display
Data Channel Command Interface) function.

PICTURE ADJUST menu

You can adjust the following items using the PICTURE ADJUST
menu.
• MODE (ECO mode)
• BACKLIGHT
• CONTRAST 6
• BRIGHTNESS
• COLOR
• GAMMA
• SHARPNESS
• MODE RESET 0
Notes
• You can adjust the backlight, contrast, and brightness for each mode.
• Settings in the PICTURE ADJUST menu can be made for the current
input. You can also adjust settings for other inputs.
x Selecting the MODE (ECO mode)
You can select the desired mode for your needs.
Note
You can also select the picture mode with ECO button (page 6, 21).
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
ADJUST) and press the OK button.
The PICTURE ADJUST menu appears on the screen.
13
(GB)
Allows the computer to control
menu settings.
Does not allow the computer to
control menu settings.
P C T U R E A D J US T I
U S E R
:
1 0 0
:
7 0
:
5 0
1 9 2 0 x 1 2 0 0 / 6 0 H z
E X I T
(PICTURE