Metabo KHE 32 Gebrauchsanleitung Seite 10

6020.book Seite 10 Montag, 23. Januar 2006 4:22 16
ENGLISH
ENG
Operating Instructions
Dear Customer,
Thank you for the trust you have placed in us by buying a Metabo power tool. Each Metabo power tool
is carefully tested and subject to strict quality controls by Metabo's quality assurance. Nevertheless, the
service life of a power tool depends to a great extent on you. Please observe the information contained
in these instructions and the enclosed documentation. The more carefully you treat your Metabo power
tool, the longer it will provide dependable service.
Contents
1 Declaration of Conformity
2 Specified Conditions of Use
3 General Safety Information
4 Special Safety Information
5 Overview
6 Special Product Features
7 Start of Operation
7.1 Side handle installation
8 Use
8.1 Depth stop setting
8.2 Switching on/off
8.3 Operating mode selection
8.4 Selection of direction of rotation
8.5 Drill chuck change
8.6 Tool change with SDS chuck
8.7 Tool change with keyless chuck
9 Tips and Tricks
10 Maintenance
11 Trouble Shooting
12 Accessories
13 Repairs
14 Protection of the Environment
15 Technical Specifications
1 Declaration of Conformity
We, being solely responsible, hereby declare that
this product conforms to the standards and
directives specified on page 2.
2 Specified Conditions of Use
With the appropriate accessories this rotary
hammer drill is suitable for impact drilling with
impact masonry bits and chiselling into concrete,
stone and other such materials, with impact core
drill bits into masonry and similar materials as well
as for non-impact drilling into metal, wood, etc.
and for driving screws.
The user bears sole responsibility for any damage
caused by inappropriate use.
10
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3 General Safety Information
Before using this power tool, completely read and
understand the enclosed safety information (red
booklet) and the instructions. Keep all enclosed
documentation for future reference, and pass on
your power tool only together with this
documentation.
4 Special Safety Information
For your own protection and for the
protection of your power tool pay
attention to all parts of the text that
are marked with this symbol!
Wear ear protectors. Exposure to noise can
cause loss of hearing.
Wear a suitable dust protection mask.
Use the additional handle supplied with the
tool. Loss of control can lead to injuries.
Work only with the additional handle correctly
installed.
Always hold the machine with both hands using
the handles provided, stand securely and concen-
trate.
Always wear protective goggles, gloves, and
sturdy shoes when working with this tool.
Ensure that the spot where you wish to work is free
of power cables, gas lines or water pipes (e.g.
using a metal detector).
Hold the power tool only at insulated housing
parts if there is any danger of making contact
with concealed electric cables or the supply
cable. Contact with live wires energises the metal
parts of the housing and can cause electric shock
to the operator.
Metabo S-automatic safety clutch.
When the safety clutch responds, switch off the
machine immediately!
Do not touch the rotating tool!
Remove chips and similar material only with the
machine at standstill.