Get Ready; Before The First Use; Normal Use; Brewing Coffee - BOB-HOME CAFE CLUB Bedienungsanleitung

Before the first use
1. Remove the machine from package, and check whether the accessories are complete.
2. Clean all the detachable components.
3. Open water tank cover, pour appropriate water in water tank with glass carafe. Do not exceed
the maximum capacity.
4. Close the cover.

Normal use

The following are normal during the use of the machine
1. There are some sounds when using machine, as inside pipe is heating, and machine continuous
boiling water.
2. If the temperature of water and environment is very low when using machine, it will take more
time to brew out water.
3. There will be few water drops into the carafe after function button lights off.
4. There will be few water-drops on the top of steam outlet.
5. Do not take away the glass carafe when machine is working.
LED Program Display
The programs of the machine can be switched between using the SET button. The
programs are indicated by the LEDs under the buttons.
Once the desired program is indicated the program can be started with the START
button.

Brewing coffee

1. Start: Connect the power, turn on the power button at the back of machine, machine enter
'Stand by' mode.
2. Stand by: Under 'Stand by' mode, "SET", "START", "WARM" indicator light on, by default is 2
cups indicator light will be on.
3. SET: Press the „SET" button, you can choose "2 CUPS / 4 CUPS/ RINSE, indicator lights will light
on depending on the program, On start up the 2 cups indicator light will be on.
4. Brewing: Under 'Stand by' mode, put 15g/30 g of ground coffee (medium grind equivalent to
that of a filter standard - sand-like between the fingers) in to the filter (prefer a slightly finer grind
when using the steel filter). Place the filter into glass carafe, and last put the glass carafe in
specified location, press "SET" button to choose 2 CUPS / 4 CUPS button, press "START" button
(indicator light on), other function indicator lights off, then machine start.
5. after brewing is complete, "RINSE" indicator lights will light on and machine will automatic
keep warm for 28 mins, then go back 'Stand by' mode. You can press "KEEP WARM" button to
cancel this function.
G E T R E A D Y
GB