Intended Use; Installation And Connection - Oase AquaMax Eco Classic 9000 C Gebrauchsanleitung

- EN -
3.2

Intended use

Only use the product described in this manual as follows:
• For pumping normal pond water for filter systems, waterfall systems and water course systems.
• Operate in accordance with instructions. (→ Technical data)
• Use for private purposes only.
The following restrictions apply to the unit:
• Do not use in swimming ponds.
• Never use the unit with fluids other than water.
• Never run the unit without water.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
• Do not connect to the domestic water supply.
4

Installation and connection

The unit can be placed submerged or dry.
 B
W A R N I N G
Death or serious injuries from hazardous electrical voltage due to operation of this unit in a
swimming pond.
• Never operate this unit in a swimming pond.
4.1 Submerged installation of the pump
 C
• Only install the unit below water level.
Place the unit horizontally on the ground ensuring its stable position.
How to proceed:
 D
1. Shorten the stepped hose adapter to the diameter of the hose used if necessary.
– This reduces pressure losses.
2. Screw the stepped hose adapter including union nut and sealing ring to the outlet.
– Align the stepped hose adapter prior to tightening the union nut.
3. Slip the hose clip over the hose, fit the hose onto the hose connector and secure with the hose clip.
20