HURAKAN HKNBCF3 Handbuch Seite 58

EN
Selection of Soft cooling cycle (1):
press and release button, icon blinks off, and icon still lights up. To start
the cycle, press and release button.
Cycle interruption:
press and release button, the icon of the corresponding cycle starts flashing. The
cycle restarts by pressing button again or automatically restarts when the set
parameter (maximum cycle interruption time) is reached.
Full stop (cancellation):
press and hold button for more than 2 sec to switch the device to the stand-by
mode.
Other cycles are selected and started in accordance with the similar procedure.
10.3.3. Setting the real time clock (RTC):
press and hold button to access the clock setting menu to set the date and time. Use
arrows to display elements: Min=minutes, Hou=hours, dAY=days,
Mon=month, YEA=year, tiM=date format: Eu=dd/mm/yyyy, USA =mm/dd/yyyy.
arrows are also used to switch between parameters.
To edit, press button; to apply the changes, press this button again.
58