HumanTechnik PL-51 Bedienungsanleitung Seite 9

2
1
Congratulations on purchasing your telephone amplifier PL-51. You have
selected a modern and reliable system.
Please read the operating instructions thoroughly in order to take the system
into operation and to become acquainted with all capabilities of the system.
Start up
Please follow these instructions before using the telephone amplifier:
1. Telephone receiver cord
Unplug the telephone cord from the telephone connection socket. Remove
the receiver cord from the cable guide on the underside of your telephone by
pushing the locking clip towards the body of the plug and pulling it out toget-
her with the cord. This plug of the receiver cord (1) is plugged into the socket
on the small side of the PL-51. Make sure the plug catches completely.
2. Connection cord
Plug one end of the supplied connection cord (2) into the wide side of the
PL-51 and plug the other end into the receiver socket on the underside of the
telephone. Position the cord in the empty cable guide. Finally reconnect the
telephone cord to the telephone connection socket. Your telephone is now
ready to operate again.
Switch on
The hearing amplifier automatically switches on when the receiver of the
telephone is picked up. The green light on top of the unit lights up to indica-
te that the amplifier is switched on.
English 9