Bluetooth Operation - Roadstar HIF-8899BT Bedienungsanleitung

5 English
transportation, remember to clock again this screw in counter-clockwise direction
to prevent damages.
1. Select PHONO/AUX mode using FUNCTION SELECTOR (7) (2 on remote).
2. Open the Record Player Cover. Release the Tonearm Clamp, and remove the
stylus protector. Place a record on the turntable, over the central spindle. Place
the EP adapter over the central spindle when playing 17cm EP records.
3. Set 33/45/78 RPM SPEED SELECTOR (27) to 33 / 45 / 78 rpm according to
the record.
4. Lift the Tonearm with the Tonearm Lift Lever. Move the tonearm to the begin-
ning of the record, or to the start of a particular track. Gently lower the tone arm
onto the record with the Tonearm Lift lever to start playing.
5. When the record is finished the tonearm will automatically stop and return auto-
matically to the rest. To stop manually, lift the tonearm from the record and
return it to the rest.
6. Moving or jarring the turntable without securing the Tonearm clamp could result
in damage to the Tonearm. Replace the protective cap on the stylus when not
in use.
AUX-IN
This unit provides an auxiliary audio input jack for connecting external audio device
like MP3 players, CD players and allow playback of your external source through
the system speakers.
1. Use an audio cable (not included) with a 3,5mm plugs on one end of the cable.
Plug one end into the AUX-IN jack on the main unit and plug the other end of
the cable into the LINE OUT or HEADPHONE Jack of your external audio devi-
ce.
2. Turn ON the unit and your external audio device. Select PHONO/AUX mode u-
sing FUNCTION SELECTOR (7) (2 on remote).
3. Start to play the external device (see the user manual of the external device).

BLUETOOTH OPERATION

1. Select PHONO/AUX mode using FUNCTION SELECTOR (7) (2 on remote).
2. Select from your portable device (Smartphone, Tablet...) the ID Bluetooth tag-
ged as HIF-8899BT, then confirm connection.
3. When the pairing is successful the LED will stop blinking.
4. Now you can transfer the music to the HIF-8899BT and all operations can only
be operated from your mobile device.
PLAYBACK FROM USB
1. Insert the USB device's plug into the USB socket.
2. Select PHONO/AUX mode using FUNCTION SELECTOR (7) (2 on remote).
3. The unit will start reading the device automatically after the connection.
4. Use the same procedure as CD to listen to your USB device.