Storing The Device When Not In Use; Restore Factory Settings - Silvercrest SFA 4.1 E1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SFA 4.1 E1

9.13 Storing the device when not in use

If the device is not going to be used for a long period of time, you should recharge the
battery on a regular basis. This helps maintain battery performance. Keep the device in a
dry, clean and cool place.

9.14 Restore factory settings

You can restore the hands-free kit to its factory settings. Doing so will delete the list of connected devices in the hands-
free kit.
Proceed as follows:

With the hands-free kit switched on, hold down the standby button (8) and the - button (5) simultaneously for
about five seconds until two beeps sound.

Press the standby button (8) to switch the hands-free kit off and complete the procedure.
The next time you switch on the hands-free kit, it starts directly in pairing mode and the mute button (3) alternates
between flashing blue and orange.
98 - English