G Turning The Iron On; H Ironing; I Turning The Iron Off; J Storing The Iron - Leifheit Air Flow M Solid Plus Bedienungsanleitung

G
Turning the iron on
Preparation
Place the Ironing Board on a firm, level surface!
Unwind the cord on the Ironing Board [6] and re-
move the base frame from the transport securing
device [8] by pulling on the upper cross tube [7].
The Ironing Board folds out and can be set to the
required position. It can then be tipped forward to
stand on the floor.
The ironing board is gradually height-adjustable
(approx. 74-100 cm) and allows ironing while
standing or sitting.
To adjust the height, take hold of the ironing board
with both hands [2]. Lift the ironing board up
slightly and pull the lever with one hand.
The ironing board has to be slightly raised for
safety reasons, i.e. to prevent the lever from being
activated accidentally.
Only when you hear the ironing board lock into
place is it secure.
Pressing on the ironing surface causes the under-
frame to automatically adjust to uneven floors.
Switching the iron on
A standard iron can now be placed on the shelf [5].
Always follow the instructions for use provided
with the iron.
Plug the mains plug of the Ironing Board into a wall
socket.
Then plug the mains plug of the steam iron into
the ironing board power outlet [3]. Thus providing
a power supply to the steam station.
The Ironing Board is ready for use.
14
H
Ironing
1. with blow-up function
(set switch [4] to position I)
The blower function provides
crease-free ironing results with delicate fabrics
and items of clothing resting on a cushion of air.
2. without blow-up function
(set switch [4] to position 0)
For normal ironing, leave the
blow-up function switched off and iron as with
a conventional ironing board.
I
Turning the iron off
Switch the iron off and disconnect the ironing
board power cable [6] from the power outlet.
Always follow the instructions for use provided
with the iron.
J
Storing the iron
Take hold of the Ironing Board with both hands,
lift it up slightly and fold together using the
lever [2].
Wind the cord [4] up loosely in loops, making
sure that it is not squashed or kinked.
The Ironing Board can be stored away folded up
(with the universal iron rest at the top).
Place the Ironing Board in a safe position so that
it will not fall over.
The transport lock should be engaged to
secure the frame whilst the board is folded up.