Care And Daily Cleaning - Siemens TE65 Serie Gebrauchsanleitung

en

Care and daily cleaning

F
Rinsing the filter simultaneously
activates the setting for displaying the
message "Please change water filter".
When this message appears, or at
the latest after two months, the filter
will no longer be effective. It needs to
be replaced for reasons of hygiene
and to prevent a build-up of limescale
(which could damage the appliance).
If you do not intend to insert a new filter,
select the setting No filter and touch B
to confirm.
F
If the appliance has not been used
for a prolonged period (for example,
while you are on holiday), the existing
filter should be rinsed before the
appliance is used again. To do this,
simply dispense a cup of hot water.
Languages
Setting up the language to be used for
display texts.
■ Use I to choose the desired
language and touch B to confirm
your choice.
Frost protection
Service programme to prevent frost
damage during transportation and storage.
This programme completely empties the
appliance.
F
The appliance must be ready for use
and the water tank 5 must be filled.
■ Touch C to begin running the
programme.
■ Remove the water tank; the appliance
automatically empties all its pipes and
then switches itself off.
■ Empty the water tank 5 and the drip tray 17.
Key tones
Switches on or off the tones that you hear
when you touch the control panel.
■ Touch B to confirm your choice.
■ Use I to choose Key tones ON
or Key tones OFF and touch B to
confirm your choice.
20
Beverage statistics
(depending on the type of appliance)
Shows the volume of drinks dispensed
since the appliance was taken into service.
■ Touch F to exit from the display.
Factory settings
Resets your own settings to the condition
when delivered.
■ Touch C to clear all your own
settings.
Care and daily cleaning
E
Risk of electric shock!
Before cleaning the appliance, unplug
it from the mains. Never immerse
the appliance in water. Do not use a
steam cleaner.
■ Wipe the outside of the appliance with a
soft, damp cloth.
■ Clean the control panel with a microfibre
cloth.
■ Do not use any cleaning agents
containing alcohol or spirits.
■ Do not use abrasive cloths or cleaning
agents.
■ Always immediately remove any lime-
scale, or residues of coffee, milk, cleaning
or descaling solution. It is possible for
corrosion to form underneath such
deposits.
■ New sponge cloths may contain salts that
can cause rust films to form on stainless
steel, so such cloths should always be
thoroughly rinsed before use.