Outdoorchef Hudson Grill 305BX Baugruppe & Betriebsanleitung Seite 47

Front Doors
4
1. Stand cart upright.
2. Align door bracket holes with holes on front legs. Attach door bracket to left and right
panel assemblies with (4) M4x10 screws. Note: Attach bracket so that magnets are
at bottom.
3. Remove the screws and washers pre-assembled to the door handle ends, and use
them to attach handles to doors.
4. Insert the lower door pin into the hole on the bottom shelf. Push down the upper door
pin, align it beneath hole in door bracket, and release pin so that it inserts in hole.
5. Repeat this for the other door.
6. Note: If the doors do not line up when closed or cannot close freely, loosen the
screws on the door pin bracket. Adjust the door pin bracket as necessary, and re-
tighten screws. Recheck door alignment once grill is completely assembled and re-
adjust if necessary.