Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch C-EXACT 1 Originalbetriebsanleitung

Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for (un)screwing screws and
tightening/loosening nuts in the specified dimension and
performance range. It must only be connected to the mains
via a PUC-EXACT series power supply unit.
The power tool is not intended for drilling; in order to pre-
vent personal injury and damage to property, power tools
with a shut-off clutch should never be used for drilling.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Application tool (e.g. screwdriver bit)
(2) Tool holder
(3) Quick-change chuck ¼"
(4) Marking ring

Technical data

Electric straight screwdriver with push start
Article number
Rated voltage
Rated current
No-load speed
Maximum torque, hard/soft screwdriving application according to
ISO 5393
Direction of rotation
Marking ring
Max. screw diameter
Weight according to EPTA-Procedure 01:2014
Protection rating
Electric straight screwdriver with push start
Article number
Rated voltage
Rated current
No-load speed
Maximum torque, hard/soft screwdriving application according to
ISO 5393
Bosch Power Tools
(5) Rotational direction switch
(6) LED indicator for screwdriving applications
(7) Tool cable for connecting to the PUC-EXACT power
supply unit
(8) Hanging hook
(9) On/off switch
(10) Slider for preselecting the torque
(11) Tool cable sleeve
(12) Worklight
(13) Connection socket on the PUC-EXACT power supply
unit
(14) On/off switch on the power supply unit
(15) Groove in the clutch of the tool cable (7)
(16) LED "ready for use" indicator
(17) LED fault indicator (overload)
(18) Mains cable connector plug
(19) Mains cable
(20) Mains plug
(21) Mains cable connection socket
(22) Adjustment tool
(23) Setting disc
(24) Handle (insulated gripping surface)
C-EXACT 1
0 602 495
207
V 36
A 1.0
rpm 1000
Nm 0.2 – 0.8
in lbs 1.8 – 7.1
light green
M 2.5
kg 0.87
lbs 1.4
IP 20
C-EXACT 4
0 602 495
205
V 36
A 1.0
rpm 1000
Nm 0.5 – 3.5
in lbs 4.4 – 31.0
English | 15
C-EXACT 1 C-EXACT 2
0 602 495 0 602 495
218 208
36 36
1.0 1.0
500 500
0.2 – 0.8 0.5 – 2.0
1.8 – 7.1 4.4 – 17.7
light green white
M 2.5 M 4
0.87 0.87
1.4 1.4
IP 20 IP 20
C-EXACT 4 C-EXACT 4
0 602 495 0 602 495
206 217
36 36
1.0 1.0
1000 275
0.5 – 3.5 0.5 – 3.5
4.4 – 31.0 4.4 – 31.0
1 609 92A 4S1 | (06.03.2019)