Manual Tuning - Schwaiger DAB 650 Bedienungsanleitung Und Sicherheitshinweise

USER GUIDE
Station List
1. During DAB mode, press the MENU button to access DAB menu.
2. Press the /
button to confirm.
3. A list of DAB stations will show on the display.
Auto Scan
Press the MENU button, and then press the
Press the SELECT button to confirm to activate auto scan.
1. The display will show "Scanning..." and a progress slide bar.
2. All the stations that have been found will be stored automatically. To explore
and listen to the found stations, press the
then press the SELECT button to confirm.

Manual Tuning

As well as the auto tune function, you can manually tune the receiver. This can
help you when aligning your aerial or when adding stations that were missed while
auto tuning.
1. Press MENU on the remote control to display the menu.
2. Press the /
button to confirm.
3. The display will show the multiplex 5A to 13F.
4. Press the
button to confirm.
5. Now view the Station List and you will find any new radio stations that have
been manually tuned in.
DAB DISPLAY MODES
Every time you press the INFO/MENU button on
unit or INFO button on the remote control, the
display will show the following display modes:
DLS – Programme Type – Ensemble/Fre-
quency – Signal error/Strength – Bit rate/
Codec/Channels – Date
DLS (Dynamic Label Segment)
This is a scrolling message giving real-time infor-
mation, e.g. song titles, news headlines, etc.
/ buttons to select Station list and then press the SELECT
/ buttons to select Manual tune, and press the SELECT
/ / buttons to select the channel, and press the SELECT
/ /
/
48
buttons to select Scan.
/ buttons to select and