Disposal; Technical Data; Technical Connections; Foot Switch - Vieweg DC 200 Bedienungsanleitung

VIEWEG

7 Disposal

At the end of its service life, dispose of the controller in accordance with the applicable
local regulations .
EN

8 Technical data

Outer dimensions (W x H x D)
Weight
Dispensing duration
Power supply
Internal voltage
Compressed air input
Compressed air output

9 Technical connections

9.1 Foot switch

The footswitch input signal is activated
when the input pin (1) is
short-circuited to the GND pin (3) .
Do NOT connect an external power
supply to these pins!
This can lead to a defect in the device.
Electrical parts cannot be disposed of with household waste .
According to Directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), electrical equipment must be returned to the
collection points set up for this purpose in order to be reused .
Operating Instructions DC 200
235 x 75 x 225 mm
approx . 1 . 2 5 kg
0 . 0 1 - 31 sec . (see page 19)
85 - 264 V AC 50/60 Hz
24 V DC
5 – 7 bar
DC 215: 0,08 - 1 bar
DC 270: 0 - 7 bar
3
DC 200
Input
Microcontroller
20
1
4k7
33R
WS
Foot
switch
SW
GND