Connection Diagram; Operation - Vieweg DC 200 Bedienungsanleitung

VIEWEG
The dispensing material quantity depends on the following:
set pressure, the size of the dispensing needle, the viscosity
of the material and the dispensing duration . You will find
tips on dispensing in our Simply Dispensing brochure .

4.2 Connection diagram

EN
If you have connected everything correctly, your setup with wiring will look something
like this:
Barrel
adapter

5 Operation

5.1 The different operating modes
The DC 200 has two different operating modes, the manual and
the timer mode . You can switch between these two modes with
the orange toggle switch on the front of the device . In the Timer
Mode the toggle switch is illuminated .
MANUAL Mode
In the manual mode (MANUAL) you control the dispensing unit with the foot switch or
finger switch (optional) . The unit dispenses as long as you hold down the switch or the
button .
Power 230V AC
Barrel
Dispensing
air pressure
Operating Instructions DC 200
Compressed air 1-7 bar
Com- pressed
air inlet
18
NOTICE
Foot switch