Operating Elements And Connections; Terminals And Sockets On The Unit; Rotary Function Switch - Wetekom 90 45 16 Bedienungsanleitung

Operating Elements and Connections

Terminals and Sockets on the Unit

10 A Input (5)
This socket is intended for connecting the red test lead for taking
AC/DC current measurements in the range up to 10 A. Set the
rotary switch (4) to 10 A (AC/DC).
A Input 2 A (6)
This socket is intended for connecting the red test lead for taking
AC/DC current measurements in the 2 A range. Set the rotary
switch (4) to a position between 20 µA and 2 A (AC / DC).
COM Input (7)
This socket is intended for connecting the black test lead for all
measurements.
V/Ω/ Input (8)
This socket is intended for connecting the red test lead for
voltage and resistance measurements as well as for the diode
function and continuity tests. The rotary switch (4) must be turned
to the corresponding position for each function.

Rotary Function Switch (4)

To select the required measurement function, turn the rotary
switch so it points to the symbol corresponding to the required
function (see chapter "Inscriptions and Symbols on the Unit").
28