Intended Use; Service Life - Ottobock 2R10 Gebrauchsanweisung

2R10*
2R33*
2R51*

2 Intended use

2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
• The maximum approved body weight is specified in the technical data
(see Page 13).
2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)

2.4 Service life

In general, all modular adapters are tested by the manufacturer for 3 million
load cycles. Depending on the patient's level of activity, this corresponds to
a service life of 3 to 5 years.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
3.2 General safety instructions
CAUTION
Excessive strain on the product
Risk of injury due to breakage of load-bearing components
► Use the product according to the specified area of application (see
Page 9).
Allowable single axis feet
1H* (requires 2S88 dorsal stop set), 1G9*
1H*
9