Cleaning and maintenance
Using the lock for the lid
You can keep the lid of the cooler open by hooking the chain in the screws on the
inside (fig. 5, page 5).
7
Cleaning and maintenance
!
WARNING!
Always disconnect the cooler from the mains before you clean and
service it.
A
NOTICE! Beware of damage
• Never clean the cooler under running water or in dish water.
• Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooling device.
➤ Occasionally clean the cooler interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the cooler are free of any dust and
dirt, so that heat can be released and the cooler is not damaged.
➤ Open the lid if the cooler is not going to be used for a long time.
8
Warranty
The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and warranty processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
12
BordBar TB08
EN