Booster Function; Power Management - Electrolux EKI6450AO Benutzerinformation

10 www.electrolux.com
Display
5.3 Activating and deactivating
the hob
Touch
hob. Touch
the hob.
5.4 Heat setting
Touch
Touch
The display shows the heat setting. Touch
and
the cooking zone.
5.5 Automax
The Automax function lets you get the
necessary heat setting in a shorter time. It
sets the highest heat setting for some
time (refer to the diagram), and then de-
creases it to the necessary heat setting.
To start the Automax:
1.
Touch
play.
2.
Immediately touch
in the display.
3.
Immediately touch
again until the necessary heat setting
comes on. After 3 seconds
on in the display.
4.
To deactivate the function touch
11
10
9
8
7
6
5
4
3
2
1
0
The Booster operates.
The Automatic Switch Off operates.
for 2 seconds to activate the
for 1 second to deactivate
to increase the heat setting.
to decrease the heat setting.
at the same time to deactivate
. comes on in the dis-
.
again and
1 2 3 4 5 6
Description

5.6 Booster function

The Booster function makes more power
available to the induction cooking zones.
The Booster function is activated for 10
minutes at most. After that, the induction
cooking zone automatically changes back
to the highest heat setting. To activate,
touch
To deactivate, touch

5.7 Power management

The power management divides the pow-
er between two cooking zones in a pair
(see the illustration). The Power function
increases the power to the maximum level
for one cooking zone in the pair and de-
creases the power in the second cooking
zone. The display for the reduced zone
changes between two levels.
comes on
comes
5.8 Timer
Use it to set an automatic switch-off time
for a cooking zone.
1.
Set the cooking zone. Touch
again and again until the indicator for
the necessary cooking zone comes
on.
7 8 9
2.
Set the heat setting for the cooking
zone. You can also set it after you ac-
tivate the timer.
. comes on in the display.
or
You must set the cooking zone
before you activate the timer.
.