PumpLine
E
Persons who are not completely familiar with the operating instructions should not be permitted to use
this fire brigade suction pump! (Operation only by correctly instructed persons)
This machine should not be used by persons (including children) who have limited physical, sensory or mental
capabilities or who have no experience or the necessary knowledge unless they are under the supervision of
a person responsible for their security or have received from them instructions about how the equipment is to
be used. Children should be under supervision to make sure that they do not play with the machine.
Mode of operation
The Suction Pump Vac Cleaner consists of a round container into which the material to be removed is sucked
up by negative pressure through a suction tube and a suction hose. A pump which is built in to the container
continuously pumps the dirty water through a drainage hose into the open or into the waste water system.
This means that the suction activity is normally possible without any break.
The Suction Pump Vac Cleaner should not be used as a dry suction cleaner but only for sucking up
water. Suction work without the sponge filter (1.4), or improper handling will lead to a loss of any gu-
arantee claim!
In order to use the product correctly, please read the following instructions carefully.
Technical data can be obtained from the type plate or the table on page 2.
Mounting the handles (see figs. 2–4)
Please loosen the screws (21) on the clamps and insert the handle (20) between both clamps.
Tighten the scr
ews (21) and secure the handle (20) with the safety screw (22).
11