Dometic CRX1050 Montage- Und Bedienungsanleitung Seite 20

Installing and connecting the refrigerator
A
NOTICE!
Make sure the polarity is correct.
➤ Before starting up the appliance for the first time, check whether the
operating voltage and the battery voltage match (see type plate).
➤ Connect the refrigerator to a plug socket which is fuse-protected with at
least 15 A (at 12 V) or 7.5 A (at 24 V) (fig. b 1, page 8).
➤ Connect the red cable (fig. b rt, page 8) to the positive terminal of the
battery.
➤ Connect the black cable (fig. b sw, page 8) to the negative terminal of
the battery.
Connecting the refrigerator to AC mains
D
DANGER! Danger of fatal injury!
 Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
 If you are operating your refrigerator on a boat with an
AC mains connection using a shore connection, you must
install a residual current circuit breaker between the AC mains
and the refrigerator.
Seek advice from a trained technician.
Proceed as follows when you connect the refrigerator to the AC mains:
➤ Plug the connector into the AC socket (fig. c 1,page 8).
20
CRX1050, CRX1065, CRX1080
EN