Preparing your modem
1.
Unplug the power cable/DSL modem. If it has a battery
backup, remove the battery.
NOTE:
you will need your username/password from
your Internet Service Provider (ISP) to properly
configure the router.
2.
Connect your modem to the router with the bundled
network cable.
3.
Power on your cable/DSL modem.
4.
Check your cable/DSL modem LED lights to ensure the
connection is active.
WEU15092_GT-AC2900_QSG_172x144mm.indb 5
If you are using DSL for Internet,
Unplug
5
2019/1/25 16:41:13