Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Please mind the following safety notes and also the included
General Safety Notes to avoid malfunction, damages or physical
injuries:
Make sure the operating voltage stated on the type label corresponds to
the power mains available in your area.
Check the belt and disc sander and the electrical connections for any
damage and do not use the tool if the sander or the cable is damaged.
Persons with limited physical, sensorial or mental abilities are not allowed
to use the unit, unless they are supervised and briefed for their safety by a
qualified person.
Use the belt and disc sander according to this manual and only for the
intended application.
Keep the belt and disc sander out of reach of children or persons in need
of supervision.
Before starting up, make sure that no spanners or adjusting keys are in the
machine.
Avoid contact with grounded surfaces such as radiators, pipes etc.
Make sure that the belt and disc sander is switched off before plugging in.
Do not use the belt and disc sander when your reactivity is affected by
alcohol consumption, medication, drugs, illness or tiredness.
Make yourself familiar with your working area and be alert for possible
hazards, which you might not hear due to machine noise.
Do not expose the belt and disc sander to moisture and do not immerse
the machine in water or other liquids.
Note: Consider the slow-down time of the machine after switching off.
Never attempt to slow down the sanding belt with your hands or by using
pressure.
Do not touch the sanding belt immediately after operation; it may be
extremely hot and cause burns. The sanding belt is sharp-edged.
Do not put force on the machine.
Avoid sanding against nails and screws. Inspect the work piece and
remove all nails and screws before sanding.
Safety Notes
11
Werbung
Inhaltsverzeichnis
