Domo DO266A/S Gebrauchsanleitung Seite 58

will appear. The "cool" or "dry" mode will end automatically.
The fan will continue to operate, this is normal.
· Move the unit over to a place where you can easily drain the
water.
· Remove the drain plug at the bottom of your unit (A) and drain
the water.
· After fully draining the water tank, place the drain plug back on
the drain opening.
· Restart the unit, make sure the error code P1 is no longer
displayed. When the code doesn't disappear, try turning off and
on the unit a few times. When the error code continues, please
contact the after sales service.
· NOTE : always make sure to install the drain plug, before
turning the unit back on.
CLEANING
· Always remove the plug from the socket before cleaning the unit.
· Never use any chemical or abrasive products to clean the unit.
· Never clean the unit with water or any other liquid, this can cause electrocution.
· When the power cord is damaged it must be repaired or replaced by the after sales surface
of the manufacturer or by a qualified person.
Air filter
· Clean the air filter at least ever 2 weeks. To make sure the
airco can operate in optimal conditions.
· Clean the air filter in lukewarm water with a bit of
detergent. Rinse the filter thoroughly and let it dry.
· Make sure the filter is completely dry before placing it
back in to the airco.
Airco body
Use a damp, soft cloth and a bit of mild detergent, to clean the outside of the unit. Make sure
the unit is thoroughly dried afterwards.
Storing
Before storing the unit for a longer periode of time, please follow the next steps :
· Drain all the water from the appliance.
· Afterwards turn on the unit in the "fan" mode for half a day. Make sure the unit is placed in
a heated room. This will dry the unit completely and previent the forming of mold.
58
DO266A/S
A