Marmitek silverline 8 Gebrauchsanleitung Seite 6

Clearing all stored learned commands under a mode:
1. Press and hold SETUP until the LED indicator light steadily.
Release the SETUP button.
2. Press the desired Mode button (TV, VCR, CBL, SAT, AUX, CD,
etc.).
3. Press and release the LEARN key.
4. Press the SETUP key. The LED will turn off after a few seconds.
5. All learned commands entries under that mode are now
cleared.
Notes for learning your remote:
Make sure you have fresh batteries in both remotes before
learning.
Take care not to move either remote while pressing the buttons.
No functions may be stored under the Learn, Setup, TV, VCR, CBL,
SAT, CD, AUX1, AUX2, X-10, Enter keys or directly under the Shift key.
Experiment by learning 2 or 3 keys initially (to ensure compatibility)
and then clear the stored learned commands before completely
learning your original remote's keyboard.
It's only possible to learn under a total of three modes (even if it is
only one key per mode). If you attempt to learn under a fourth
mode the LED will flash for three seconds to indicate an error.
When the memory is full, the LED will flash for three seconds. It is not
possible to learn any additional keys although you can still "over-
write" previous learned keys.
Experiment with the distance between the remotes if you have a
problem learning.
Some remotes do not have their LED in the centre so you might
need to experiment with the side-to-side position of the remotes
relative to each other.
Do not sit directly under an incandescent lamp or direct sunlight
while teaching the Marmitek 8 in 1 remote.
Use buttons L1 and L2 to learn codes for which the Marmitek 8 in 1
remote does not have a corresponding button.
If you have problems learning keys, try clearing the memory and try
learning them again.
Controlling your home using Marmitek X-10 Home Automation
Modules
The Marmitek 8 in 1 remote allows you to control practically
everything electrical in your home. Besides IR technology that lets
you control all your TV, VCR, Cable and Satellite equipment it has
X-10 RF technology that lets you control lamps and appliances
anywhere in your home remotely.
Here are just some of the things you can do with your Marmitek 8 in
1 remote using the Marmitek X-10 feature:
6
E
NGLISH