Switching On The Appliance; Selecting The Temperature; Arranging Food In The Appliance; Usable Capacity - Siemens KG..F Serie Gebrauchsanleitung

Switching on the
appliance
Fig. 2
Press the On/Off button. The temperature
warning noise is switched off by pressing
the alarm button 2. The temperature
displays flash and the alarm button
display is lit up, until the appliance has
reached the set temperatures.
If the door is open, the interior light in
the refrigerator compartment is lit up.
Note
If the light switch is pressed when the
door is open Fig. 1/9, the interior light
goes out as well as the control panel
displays.
The factory has recommended and set
the following temperatures:
Refrigerator compartment
Cool fresh compartment
Freezer compartment
Selecting the
temperature
The set values can be changed,
see Description of control panel.
The temperature in the cool fresh
compartment Fig. 1/B is set at the
factory to almost 0 °C and where
possible should not be changed.
If frost forms on the refrigerated food,
the temperature can be increased.
(See Eliminating minor faults
yourself".)
+4 °C
at almost 0 °C
-18 °C
Arranging food in the
appliance
When storing the food, note
that food is well wrapped or covered over.
In this way, the aroma, colour and
freshness remain. Apart from which, the
transfer of taste and dying of plastic parts
is avoided.
We recommend arranging the food
as follows:
S On the shelves in the refrigerator
compartment:
Bakery products, ready meals, cold
sensitive fruit and vegetables
S In fresh food drawers:
Dairy products, meat and sausage
S In the humidity drawer:
vegetables, salad, fruit.
S In the door (from top to bottom):
butter, cheese, eggs, tubes, small
bottles, large bottles, milk, juice cartons.
S In the freezer compartment:
Frozen food, ice cubes, ice cream

Usable capacity

Information on the usable capacity can be
found inside your appliance on the rating
plate.
en
25