CAMPAGNOLO HYPERON Bedienunganleitung Seite 36

6.2 - DISASSEMBLY AND ASSEMBLY OF THE REAR HUB.
• Remove the sprocket set (Section 2 of the "Owner's Manual - PART 1).
• Using a stiff blade (such as small knife) positioned as indicated in fig. 7 and taking care not to damage
the hub or the spokes, remove the side covers from the hub (A - Fig. 7) from the hub.
• Unscrew the locking nut (B - Fig. 8) with a fully inserted 5 mm Allen wrench; counter the rotation of the
axle with another 5 mm Allen wrench fully inserted on the opposite end of the axle itself.
• Align the screw (D - Fig. 9) of the lock ring (C - Fig. 9) with the groove (E - Fig. 9) on the hub body.
• Using a 2.5 mm Allen wrench, slacken the screw by 3 turns (D - Fig. 10).
8
B
9
D
C
E
7
A
10
D
15