Electrolux ERES3580 Benutzerhandbuch Seite 11

- Switches off the indicator lamp for
water filter replacement.
K. Yellow indicator lamp
Lights up when the water filter must be
changed.
The functions of the water-
dispenser
The locking function:
The locking function is activated by the
production plant.
For temporary unlocking:
Keep the button (I) pressed in for about
three seconds until the yellow indicator
lamp (H) goes out. The locking
function is re-activated automatically
after about three seconds.
For permanent unlocking:
Keep the buttons (I) and (J) pressed in
at the same time for about three
seconds. The button (I) or (J) lights up
to indicate unlocking.
To activate the locking function:
Keep the buttons (I) and (J) pressed in
at the same time for about three
seconds. Activation is indicated by the
yellow indicator lamp (H) lighting up.
Selecting and obtaining water:
Before obtaining water, selection is
carried out either by pressing the
button for carbonated water (I) or the
button for ordinary water (J). The
actual choice is indicated by the
button which lights up. The selection
of water can be changed while the
water is running.
Water is obtained by pressing a glass
or other container against the opening
(M). Stop the water flow by moving the
11
L. Water out-feed
Activated when a glass or something
similar is pressed upwards against the
flap.
M. Flap
N. Lighting
glass or container downwards away
from the opening (M). Any water that
drips or is spilled is collected in the
drip bowl below the water dispenser.
When the carbonated water is being
obtained, there is a slight afterflow
when the glass is removed. The drip
bowl can be detached and emptied
when necessary.
Lighting:
The water dispenser lighting (N) illumi-
nates automatically when water is
obtained.
For continuous lighting:
1. Make sure that the water dispenser
is unlocked.
2. Then hold the button for ordinary
water (J) pressed in for about three
seconds until the illuminates.
The lighting then illuminates with about
50 % of its full intensity.
To switch off the lighting:
1. Ensure that the water dispenser is
unlocked.
2. Then hold the button for ordinary
water (J) pressed in for about three
seconds until the lighting goes out.