Setting The Time Manually; Alarm Functions - Dugena DCF-77 Bedienungsanleitung, Garantie

8. Setting the time manually

Press and hold the SET button (4) for longer than 3 seconds to
enter the manual time setting mode. The minute hand will keep
moving forward by pressing the SET button (4). Furthermore
the second hand will move 1 minute forward by pressing the SET
button (4) less than 1 second. The manual time setting mode
will stop automatically while not pressing the SET button for
more than 6 seconds.
RESET
On rare occasions the clock may not respond when pressing but-
tons or well functioning. In this case, you need to reset the clock
by pressing the RESET button (5). The clock sets itself to the 12
o'clock position and starts receiving the signal.
18

9. Alarm functions

Set alarm time
Turn the set-alarm knob (2) in the direction of the arrow in order
to set the alarm time. Never turn the set-alarm knob in the
opposite direction since this could damage the movement.
Alarm activation with silent mode
Push the alarm ON/OFF button (6) upwards. At the set alarm time,
the alarm sounds. When the alarm is activated, the second hand
stops when it reaches the 12 o'clock position to avoid ticking noi-
ses. The hour and minute hands keep operating as normal.
Interrupt alarm (snooze)
Press the button (1) in front of the alarm clock. The alarm is in-
terrupted for approx. 4–5 minutes and then sounds again. The
snooze function can be repeated within approx. 45 minutes of
the set alarm time.
Automatic switch-off
If the alarm is not interrupted or switched off, it stops automa-
tically after approx. 2 minutes. It is re-activated 12 hours later
at the set time.
Switch off alarm
To switch off the alarm, press the alarm ON/OFF button (6)
down.
19