Quick Start Guide (En) - Zotac ZBOX Serie Schnellanleitung

Quick Start Guide
Installing mSATA SSD module
1. Locate the mSATA SSD slot and insert an
mSATA SSD module into the slot at a 45
degree angle.
2. Gently push the mSATA SSD module toward
the board and install the screw.
Setting up your ZOTAC ZBOX
1. Connect to a home network
2. Connect USB devices
3. Connect a DisplayPort display
4. Connect an HDMI display
5. Connect power cable
6. Turn on the system
7. Install operating system
Rear panel
1. Memory card reader
(MMC/SD/SDHC/SDXC)
2. Power input (DC19V)
3. Headphone/Audio Out jack
4. Microphone jack
5. HDMI port
6. DP port
7. USB 3.0 ports
8. LAN (RJ45) port
9. USB 2.0 ports
10. Power button
4
2
5 3
1
2
3
4
5
1
1
9
6 7 8
2
6
10
3